Sartorius ME215 Operating Instructions Manual page 116

Preparation
Turn on the balance: press e
> The Sartorius logo is displayed
Select Extra function (F4) or Extra function (F5) in the Setup menu: press o
Select Application parameters
then the soft key once
O
Select Extra function(F4)
press the soft key 3 x (or 4 x), then the
q
Select Identification codes
Identification codes
Confirm
Identification Printout
codes
ο = factory setting
see also "Application Parameters (Overview)" in the chapter entitled
"Configuring the Balance"
Save settings for the printout: press the
Enter ID name: Select "Printout": press the
Select "Identification #": press the
Select ID1
Enter name for ID1 and confirm: use the numeric keys for numbers and/or the
soft keys to enter letters
$ Enter names for
ID2 , ID3
Save settings and exit the Setup menu: press the
Example
See next page
116
: press the
q
or Extra function(F5):
soft key once
O
Automatic, if configured
Once after pressing print, if configured
ο Each time the print key is pressed
Once for M+ function (app.3 memory)
soft key 4 x
o
soft key, then the
q
soft key 5 x, then the
q O
and ID4 , if desired
soft key
oo
soft key 2 x,
soft key
O
soft key once