Chapter
3
Pressing the top of the «
create new characteristics on a user set or to modify those of an existing user. The following
sub-menu is proposed:
Create
Modify
Delete
Pressing the «Create » key provides access to the following display: «Give extension
•
number: ». After the first digit, the following is displayed, for example:
When the repertory number is complete, the attendant confirms this number by pressing
the «Apply » key. If the repertory number corresponds to a set that has already been
created, the screen displays:
Otherwise, the screen displays:
3-22
Management from the attendant set
Create
Modify
Delete
Apply
Back
Delete
Apply
» key, then on the key below the «Admin » label is used to
Extn management operation
Create
used to program the characteristics of a new user.
used to modify existing characteristics.
used to delete existing characteristics.
Give extension number :
Delete
Number already assigned...
3EU19875ENAA - Ed. 01 - September 2002 - Alcatel 4035 Attendant set
Set Mg
Delete
Delete
Apply
Back
Back
Modify
Delete
Back
Back
5
Apply