Alcatel 4035 User Manual page 45

The internal user is in call mode and the correspondent camps-on wait on the internal user.
As long as the internal user has not answered, the «CampOn » label is displayed to indicate a
circuit being routed:
If the internal user does not answer before the end of the routing timer, the screen shows:
Note: If no other additional call is presented to the attendant set, pressing the «Next » key can also be
used to retrieve the waiting call.
On the other hand, if an additional call is presented to the attendant set and if its call priority is higher
than the waiting call, pressing the «CampOn » key can be used to retrieve the waiting call and the «Next
» key, the additional call.
2.1.5.2 Routing with presentation
By pressing the «Ring » key, the attendant puts the correspondent on hold and calls on the
called party side.
The following is displayed:
The attendant remains in call mode and waits for the internal called party to answer.
When the user off-hooks, the attendant presents the communication.
By pressing the «Transf » key, the attendant exits the conversation and the attendant set
returns to idle position. The internal user is put into conversation mode with the correspondent.
By pressing the «Releas » key, the attendant releases the conversations (B.T) and the
attendant set returns to idle position.
3EU19875ENAA - Ed. 01 - September 2002 - Alcatel 4035 Attendant set
Normal wait = 0
Normal wait = 0
Camp On
Ring
EnqOff Broker
Attendant set facilities
Urgent wait = 0
CampOn
Urgent wait = 1
Next
user Repertory
Transf CallBk
Red led
The "Camp On "
and "next "
labels flash
(cat)
Releas
2-25