Transmission Of A Calibrated Cut-Off (Flashing) - Alcatel 4035 User Manual

The attendant dials the additional digits to be sent. These digits are displayed on the right of
the screen. If the number dialled is greater than 10 digits, each subsequent digit is displayed
in the 10
Pressing the «SERVICE » fixed key, followed by the «Pulse » key exits the facility and displays
the following screen:
2.2.8

Transmission of a calibrated cut-off (flashing)

Reminder: This facility is not taken in account on an ISDN trunk group.
Implementation
This facility lets the attendant activate at the remote PBX end:
call-back by a register for acceptance of the numbering by a suffix,
•
a service operation (remote attendant intervention).
•
The attendant carries out an o/g call:
by prefix or access code,
•
by abbreviated dialling,
•
by programmed key.
•
After the attendant has entered conversation mode with the remote set, the calibrated
cut-off can be used to call a DTMF numbering translator.
Pressing the «SERVICE » fixed key activates the associated pictogram
displays the following screen:
The attendant presses the «
3EU19875ENAA - Ed. 01 - September 2002 - Alcatel 4035 Attendant set
position.
th
Status
Conv correspondent
Chain
Conv correspondent
Pulse
Men
u
Bundle
OnHold
Charge OnHook
» key to move onto the second screen:
TBR TrfOff
Attendant set facilities
Releas
FwdOp DTMF
and
SERVICE
2-39