Routing An External O/G Call To A Free Set; Routing On Busy Set - Alcatel 4035 User Manual

Chapter 2
2.1.6

Routing an external o/g call to a free set

2.1.6.1 The set is not in connection with the attendant set
The attendant enters conversation mode with an external correspondent by:
prefix or access code,
-
abbreviated dialling,
-
programmed key.
-
(see the description of the procedure
From this state, the attendant can:
route the correspondent without presentation,
-
route the correspondent with presentation.
-
The signalling during these routings is the same as for i/c routings.
Note: The charge units are charged to the attendant set when it is the last to be involved in a
communication (in case of no answer to a transfer, for example).
2.1.6.2 The set remains in connection with the attendant set
In this case, the attendant enters conversation mode with the external correspondent during
the enquiry call phase. The link is established by an ordinary transfer.
2.1.7

Routing on busy set

Multiline set
After dialling the user set number, the following is displayed, for example:
The first line displays:
Busy
The second line displays the functions which can be activated from this screen:
EnqOff
Transf
2-26
Attendant set facilities
Busy Bundle 02
EnqOff Ring
to indicate that the set has at least one resource free,
to cancel the routing in progress and return to conversation with the
first correspondent.
to transfer the call in progress (transfer on selection).
3EU19875ENAA - Ed. 01 - September 2002 - Alcatel 4035 Attendant set
in§ 2.1.3 : External call
user 3456
Transf Intrud
)
(cat)
Releas