Chapter
3
Apply
Delete
Back
Changing the content of a key
•
After pressing the key in question, the screen displays:
Number
Delete
Back
Adjusting the contrast
On pressing the «
displayed:
Displ.
Extern
Note: This screen is displayed if the set possesses one or more additional unit(s). Otherwise, only the
following screen is displayed.
On pressing the «Displ » key, the following is displayed:
•
3-10
Management from the attendant set
confirms the number dialled.
erases the number programmed.
used to return to the initial screen.
Repertory
Number
used to change the number programmed.
erases the programming for the key.
used to return to the initial screen.
» fixed key, followed by «Prog » and «Cntrst » keys, the following is
Contrast programming
Displ.
used to adjust the display and the pictograms of the attendant set.
used to adjust the pictograms of the additional unit(s).
Contrast programming
Level1
Level2
3EU19875ENAA - Ed. 01 - September 2002 - Alcatel 4035 Attendant set
Delete
Extern
Back
Level3
Level4
Back
Back