Alcatel 4035 User Manual page 49

First participant
•
The attendant then dials in enquiry call mode the number of the first participant.
After pressing «Ring» and after the answer of the called user, the following displays:
By pressing the «Cfprog» key, the attendant connects the user to the multiconference
circuit. As this user is alone, the please wait music or tone will be sent.
Other participants
•
The conference circuit being still reserved, the attendant dials in enquiry call mode the
number of the following participant and activates his call.
After the answer of the called user and by pressing the «Cfprog» key, he will connect
the two users together.
In the same way, the attendant adds the other participants to the conference.
By pressing the «Releas» key, the attendant disconnects from the multiconference circuit
and returns to its idle screen (normal service).
The conference circuit is used
The attendant is in conversation with a correspondent. This correspondent asks to join the
conference.
The circuit is not saturated
•
The attendant dials in enquiry call mode the programmed conference prefix, followed by
the access code to reserve the multiconference circuit.
After code identification, the screen shows:
Example:
By pressing the «Cfprog» key, the attendant adds the correspondent to the programmed
conference.
3EU19875ENAA - Ed. 01 - September 2002 - Alcatel 4035 Attendant set
Meet me conference
Conv user 3456
Cfprog
Conv user 3456
Cfprog
Attendant set facilities
Releas
Releas
Entity
Releas
Entity
2-29