Operation Of Keys Sk1 To Sk5 - Alcatel 4035 User Manual

Chapter 1
All the dynamic keys are also used for:
implementing additional operating facilities (call-back, text messaging, etc),
-
customising the attendant set by the «
-
modifying system management by the «SERVICE » fixed key,
-
storing an individual repertory.
-
1.5.3

Operation of keys SK1 to SK5

1.5.3.1 Function key SK1
With the label «Reseiz» displayed
-
This label is displayed during an o/g call to the exterior, on transmission of the first digit of
the external number.
This function is used to renew the numbering on the same line : the system automatically
carries out release and line seize and, on display of the trunk number, it is possible to start
numbering again.
With the label «EnqOff» displayed
-
This function is used to release the enquiry call communication and return to conversation
mode with the first correspondent.
1.5.3.2 Function key SK2
With the label «Ring» displayed
-
Following an ordinary call or an enquiry call to an internal user, this function is used to
activate ringing on the set on which the call has been connected.
If the set is free, its number is shown on the display preceded by the indication «Free ».
If this user has just off-hooked before the call, it receives the music on hold indicating that
it is «reserved » by the attendant and «Conv » is displayed before the number: in this
position, pressing this key can then be used to enter into conversation with the internal
user.
With the label «Broker» displayed
-
1-8
Presentation of the attendant set
Key
Transf
-
CampOn
-
SK3
OnHold
-
Endial
-
Fwd
-
SK4
Intern
-
Releas
-
SK5
Next
-
3EU19875ENAA - Ed. 01 - September 2002 - Alcatel 4035 Attendant set
Label
transfer.
retrieve from routing.
hold.
end of external dialling.
the called user's forwarding
destination.
group call connection.
release.
call connection.
» fixed key,
Role