Front Markings For An Fc1 With 1/3 Housing Width, Honeywell Front Design - Honeywell enCore FC1 Instructions For Use Manual

1.2 Front markings for an FC1 with 1/3 housing width,
Honeywell front design
Figure 2: FC1 front view with position of type plates

Location of type plate part 1

Location of type plate part 2

Position of securing marks (adhesive labels)
DOCUMENT: FC1: MARKINGS AND DEVICE SEALING
(1/3 housing width, Honeywell design)
PAGE: 3 OF 12