Reset Qos Policy Global; Reset Qos Vlan-Policy - HP A8800 Series Command Reference Manual

Examples
# Apply the QoS policy test to the inbound direction of VLAN 200, VLAN 300, VLAN 400, VLAN 500,
VLAN 600, VLAN 700, VLAN 800, and VLAN 900.
<Sysname> system-view
[Sysname] qos vlan-policy test vlan 200 300 400 500 600 700 800 900 inbound

reset qos policy global

Syntax
reset qos policy global [ inbound | outbound ]
View
User view
Default level
1: Monitor level
Parameters
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
Usage guidelines
Use reset qos policy global to clear the statistics of a global QoS policy.
This command is available on only SPC cards.
Examples
# Clear the statistics of the global QoS policy in the inbound direction.
<Sysname> reset qos policy global inbound

reset qos vlan-policy

Syntax
reset qos vlan-policy [ vlan vlan-id ] [ inbound | outbound ]
View
User view
Default level
1: Monitor level
Parameters
vlan-id: VLAN ID, in the range of 1 to 4094.
inbound: Clears the statistics of the QoS policy applied in the inbound direction of the specified VLAN.
outbound: Clears the statistics of the QoS policy applied in the outbound direction of the specified
VLAN.
Description
Use reset qos vlan-policy to clear the statistics of the QoS policy applied in a certain direction of a
VLAN.
70