Qos Trust - HP A8800 Series Command Reference Manual

Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display qos trust interface to display the priority trust mode and port priority of an interface.
If no interface is specified, the command displays priority trust mode and port priority settings for all
interfaces.
Examples
# Display the priority trust mode and port priority settings of GigabitEthernet 2/1/1.
<Sysname> display qos trust interface GigabitEthernet 2/1/1
Interface: GigabitEthernet2/1/1
Port priority information
Port priority :0
Port priority trust type : untrust
Table 28 Command output
Field
Interface
Port priority
Port priority trust type

qos trust

Syntax
qos trust auto
undo qos trust
View
Interface view, port group view
Default level
2: System level
Parameters
auto: Uses a priority in incoming packets for priority mapping.
Description
Interface type and interface number.
Port priority.
Priority trust mode on the interface. If the trust mode is
untrust, the port priority is used for priority mapping. If
not, a priority field in the incoming packet is used.
78