Flow-Template Basic - HP A8800 Series Command Reference Manual

# Apply user-defined flow template f1 to port group 1.
<Sysname> system-view
[Sysname] port-group manual 1
[Sysname-port-group-manual-1] group-member GigabitEthernet 3/1/1 to GigabitEthernet
3/1/6
[Sysname-port-group-manual-1] flow-template f1

flow-template basic

Syntax
flow-template flow-template-name basic { customer-vlan-id | dip | dmac | dport | dscp |
ethernet-protocol | fragments | icmp-code | icmp-type | ip-precedence | ip-protocol | mpls-exp |
service-cos | sip | smac | sport | tcp-flag | tos } *
undo flow-template { all | name flow-template-name }
View
System view
Default level
2: System level
Parameters
flow-template-name: Assigns a name to a user-defined flow template, a case-insensitive string of 1 to 31
characters.
basic: Sets the type of the user-defined flow template to basic.
customer-vlan-id: Customer VLAN ID.
dip: Destination IP address.
dmac: Destination MAC address.
dport: Destination port.
dscp: Differentiated service code point (DSCP) field in the IP header.
ethernet-protocol: Protocol type field in the Ethernet frame header.
fragments: Fragments field in the IP header.
icmp-code: ICMP code field.
icmp-type: ICMP type field.
ip-precedence: Precedence field in the IP header.
ip-protocol: Protocol type field in the IP header.
mpls-exp: EXP field in the MPLS label.
service-cos: Service provider 802.1p COS field.
sip: Source IP address.
smac: Source MAC address.
sport: Source port.
tcp-flag: Flags field in the TCP header.
17