Qos Copy Scheduler-Policy - HP A8800 Series Command Reference Manual

Default level
2: System level
Parameters
sp-name: Scheduler policy name, a case-sensitive string of 1 to 31 characters.
Description
Use qos apply scheduler-policy to apply a scheduler policy in the inbound direction of an interface or
port group.
Use undo qos apply scheduler-policy to remove the scheduler policy applied in the inbound direction of
the interface or port group.
Configured in interface view, the setting is effective on the current port only; configured in port group view,
the setting is effective on all ports in the port group.
The scheduler policy applied to an interface is mutually exclusive with the QoS policies (including
queue-based GTS, port-based WRED, and hardware congestion management) applied to the interface.
Examples
# Apply scheduler policy testsp to interface GigabitEthernet 3/1/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet3/1/1
[Sysname-GigabitEthernet3/1/1] qos apply scheduler-policy testsp outbound
# Apply scheduler policy testsp to interface Serial 2/1/19:0.
<Sysname> system-view
[Sysname] interface Serial 2/1/19:0
[Sysname-Serial2/1/19:0]qos apply scheduler-policy testsp outbound

qos copy scheduler-policy

Syntax
qos copy scheduler-policy sp-source to sp-dest
View
System view
Default level
2: System level
Parameters
sp-source: Source scheduler policy name, a case-sensitive string of 1 to 31 characters. The source
scheduler policy identified by this argument must already exist.
sp-dest: Destination scheduler policy name, a case-sensitive string of 1 to 31 characters. The specified
destination scheduler policy must not be one that already exists.
Description
Use qos copy scheduler-policy to create a new scheduler policy of the same contents as the specified
source scheduler policy.
Examples
# Copy the contents of scheduler policy sp-source to create a new scheduler policy named sp-dest.
140