Display Acl Mode - HP A8800 Series Command Reference Manual

exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display acl ipv6 to display the configuration and match statistics for the specified IPv6 ACL or all IPv6
basic and IPv6 advanced ACLs.
This command displays ACL rules in config or depth-first order, whichever is configured.
Examples
# Display the configuration and match statistics for ACL 2001.
<Sysname> display acl ipv6 2001
Basic IPv6 ACL
ACL's step is 5
rule 0 permit source 1::2/128 (5 times matched)
rule 0 comment This rule is used in GE3/1/1
Basic IPv6 ACL
ACL's step is 5
rule 0 permit source FF1E::101:101/128
Table 2 Command output
Field
Basic IPv6 ACL 2001
named flow
1 rule
ACL's step is 5
5 times matched
Uncompleted
rule 0 comment This rule is used in
GE3/1/1.

display acl mode

Syntax
display acl mode [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
2001, named flow, 1 rule,
2002, named -none-, 1 rule,
Description
Category and number of the ACL. The following field information is
about this IPv6 basic ACL 2001.
The name of the ACL is flow. "-none-" means the ACL is not named.
The ACL contains one rule.
The rule numbering step is 5.
There have been five matches for the rule. The statistic counts only IPv6
ACL matches performed by software.
This field is not displayed when no packets have matched the rule.
Applying the rule to hardware failed because no sufficient resources
were available or the hardware does not support the rule. This event
might occur when you modify a rule in an ACL that has been applied.
The description of ACL rule 10 is "This rule is used in GE3/1/1."
11