HP A8800 Series Command Reference Manual page 68

Parameters
inbound: Displays information about the inbound global QoS policy. An inbound global QoS policy
applies to the inbound direction of all ports.
outbound: Displays information about the outbound global QoS policy. An outbound global QoS policy
applies to the outbound direction of all ports.
slot slot-number: Displays information about the global QoS policies on the card specified by the slot
number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Use display qos policy global to display information about global QoS policies.
If no direction is specified, this command displays information about both inbound and outbound global
QoS policies.
If no slot number is specified, this command displays the global QoS policy or policies on the main
processing unit.
The command is available on only SPC cards.
Examples
# Display information about the inbound global QoS policy.
<Sysname> display qos policy global inbound
Direction: Inbound
Policy: 1
Classifier: 2
Operator: AND
Rule(s) : If-match acl 2000
Behavior: 2
Accounting Enable
20864 (Bytes)
Committed Access Rate:
CIR 128 (kbps), CBS 8000 (byte), EBS 0 (byte)
Red Action: discard
Green : 12928(Bytes)
Yellow: 7936(Bytes)
Red : 43904(Bytes)
62