Qos Apply Policy Global; Qos Policy - HP A8800 Series Command Reference Manual

You can apply QoS policies to all physical interfaces but X.25-enabled or LAPB-enabled interfaces.
Settings in interface view take effect on the current interface. Settings in port group view take effect on all
ports in the port group. Settings in subinterface view take effect on the current subinterface.
Examples
# Apply policy USER1 in the outbound direction of GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet2/1/1
[Sysname-GigabitEthernet2/1/1] qos apply policy USER1 outbound

qos apply policy global

Syntax
qos apply policy policy-name global { inbound | outbound }
undo qos apply policy [ policy-name ] global { inbound | outbound }
View
System view
Default level
2: System level
Parameters
policy-name: Policy name, a string of 1 to 31 characters.
inbound: Applies the QoS policy to the incoming packets on all ports.
outbound: Applies the QoS policy to the outgoing packets on all ports.
Description
Use qos apply policy global to apply a QoS policy globally. A global QoS policy takes effect on all
inbound or outbound traffic depending on the direction in which the policy is applied.
Use undo qos apply policy global to remove the QoS policy.
This command is available only on the SPC cards.
Examples
# Apply the QoS policy user1 in the inbound direction globally.
<Sysname> system-view
[Sysname] qos apply policy user1 global inbound

qos policy

Syntax
qos policy policy-name
undo qos policy policy-name
View
System view
68