Table of Contents
Advertisement
7. Installation
7a. Uncrate the machine
1. Remove all the screws holding the crate to the base, lift and set to the side.
2. Remove all the screws holding the lid to the crate and remove the stand side frames
from the top of the crate.
3. Remove the cross members packed below the laminator feed tray.
7b. Assemble the stand
1. Assemble the stand as shown below.
Hint: The stand is easier to assemble upside down, then flip over when completed.
1.
Fastening bolts
2. Side frames 3. Frame cross members
7
Gfp 44TH
October 2017
Upper cover
Side frames
Advertisement
Table of Contents
