Bolt Machine To Stand; Attach Supply Support Brackets - Gfp 255 C Operating Manual

9 E. Bolt Machine to Stand
1. Secure machine to stand from under the stand using (2) 8mm x 50 Hex
screws and (2) flat and lock washers
9 F. Attach bottom supply brackets and insert supply shaft
1. Attach Bottom supply brackets to outside of each side frame using
(4) -8mm x 20 Hex screws, flat and locking washers
2. Slide brakes on round supply shaft
3. Insert supply shaft onto bottom supply brackets
Supply Brake
Supply bracket
Gfp 255 C
14
June 2012
Supply Shaft