General Safeguards - Gfp 44TH Operating Manual

—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

4. General Safeguards

 Keep hands, long hair, loose clothing, and articles such as neckties away from rollers
to avoid entanglement and entrapment. The rollers have pinch points that can trap
body parts or clothing and cause serious injury
 Do not use the machines for purposes other than lamination and mounting, otherwise
damages to the machine or accidents may occur
 Keep out of reach of children
 Keep flammable and wet objects away from the machine.
 Do not use flammable sprays or materials when cleaning the machine
 Do not leave the machine unattended during operations.
 Do not mount metal materials or other hard objects.
 Do not put burrs, sharp blade or rigid materials in between the two rubber rollers.
 Do not attempt to laminate items that exceed total recommended material thickness
of the unit.
 Do not place foreign object inside the machine.
 Do not cut adhesive films directly on the surface of the rollers to avoid damaging the
rubber coating.
 Shut down the machine after laminating to avoid misusing this machine by others.
 Shut down the power before moving the machine
 Note the locations of foot wheels while moving or operating this machine to avoid
injuries to your feet.
 Disconnect from the power supply before repair or maintenance.
 Disconnect from the power supply when the machine is not in use for a long
time.
 When the machine sits idle for an extended period of time, raise the top rubber roller
to avoid the distortion of the rubber surface.
 Perform only the routine maintenance procedures referred to in these instructions
 Do not leave excess adhesive build up on the rollers overnight
Gfp 44TH
4
October 2017
the