Performing Basic Operations; Using Audio Devices; Making Calls - AudioCodes 405 User Manual

User's Manual
5

Performing Basic Operations

This section shows how to perform basic phone operations.
5.1

Using Audio Devices

You can use one of the following audio devices on the phone for speaking and listening:
Handset: To make a call or answer a call, lift the handset off the cradle.

Speaker (hands-free mode). To activate it, press the speaker key during a call or when

making a call. To deactivate it, press the speaker key again.
Headset (hands-free mode). When talking on the phone, you can relay audio to a connected

headset. To enable it, press the headset key. To disable it, press it again.
You can easily change audio device during a call.
To change from speaker/headset to handset: Activate speaker/headset and pick up the

handset; the speaker/headset is automatically disabled.
To change from handset to speaker/headset: Off-hook the handset and press the

speaker/headset key to activate the speaker/headset. Return the handset to the cradle; the
speaker/headset remains activated.
5.2

Making Calls

The phone offers multiple ways of making a call. After dialing a number:
LCD displays

phone directory
LCD displays the line extension number on which the called party is dialed

The phone plays a ring-back tone

LCD indications:

To end dialing a call before it's answered:
Press the End softkey or the speaker key.

Note:
• For advanced dialing using the phone directory, see Section
• For defining a speed dial key, see Section
• For using multiple lines, see Section 6.11.
Version 2.2.12
and the called party's phone number or contact name if it's listed in the
43
5. Performing Basic Operations
4.11.
4.12.
405 and 405HD IP Phone