Deleting A Configured Softkey; Configuring A Softkey As A Speed Dial; Configuring A Softkey As A Speed Dial + Blf - AudioCodes 405 User Manual

4.13.3 Deleting a Configured Softkey

This section shows how to delete a configured softkey.

To delete a configured softkey:
1. Long-press the softkey, e.g., the Missed softkey, until this screen is displayed:
2. Press the navigation control's left or right rim to navigate to and select Empty; you're
returned to the idle LCD; the sofkey is removed.

4.13.4 Configuring a Softkey as a Speed Dial

You can configure a softkey as a speed dial.

To configure a softkey as a speed dial:
1. Open the Soft Keys screen (MENU key > Keys Configuration > Soft keys).
2. Select the softkey to configure as a speed dial, e.g., select the default Directory softkey.
3. Navigate to and select Speed Dial and then in the Soft Key # screen that opens, enter the
telephone number to assign the speed dial to and press the Save softkey. View the speed
dial displayed in the idle screen (press Back after saving).

4.13.5 Configuring a Softkey as a Speed Dial + BLF

You can configure up to four softkeys as a Speed Dial + BLF.
Note: Speed Dial + BLF is presently supported for specific third parties only (see under
Appendix A.1
User's Manual
for details).
40
405 and 405HD IP Phone
Document #: LTRT-12045