6. Check:
• Gear teeth
Damage/wear Replace the starter motor.
7. Check:
• Bearing
• Oil seal
Damage/wear Replace the starter motor.
EAS30326
ASSEMBLING THE STARTER MOTOR
1. Install:
• Brush holder set
• Insulator "1"
TIP
Install the insulator as shown in the illustration.
2. Install:
• Starter motor rear cover "1"
• Starter motor yoke "2"
• Starter motor front cover "3"
TIP
Align the match marks "a" on the starter motor
yoke with the match marks "b" on the front and
rear cover.
b
1
EAS30327
INSTALLING THE STARTER MOTOR
1. Install:
• Starter motor "1"
• Negative battery lead "2"
• Starter motor bolts "3"
TIP
Install the negative battery lead as shown in the
illustration.
1
a
b
2
3
ELECTRIC STARTER
Starter motor bolt
12 N·m (1.2 kgf·m, 8.7 lb·ft)
2. Connect:
• Starter motor lead
5-37
1
3
2
45˚