Yamaha Tracer MT09TRAH 2017 Service Manual page 282

3. Apply:
• Sealant
(onto the stator coil assembly lead grommet)
Yamaha bond No. 1215
90890-85505
(Three bond No.1215®)
4. Install:
• Generator cover gasket
• Generator cover
Generator cover bolt "1"
12 N·m (1.2 kgf·m, 8.7 lb·ft)
LOCTITE®
Generator cover bolt "2"
12 N·m (1.2 kgf·m, 8.7 lb·ft)
TIP
Tighten the generator cover bolts in stages and
in a crisscross pattern.
2
2
1
5. Connect:
• Stator coil coupler
• Crankshaft position sensor coupler
TIP
To route the stator coil lead, refer to "CABLE
ROUTING" on page 2-35.
GENERATOR AND STARTER CLUTCH
New
2
5-33