Yamaha Tracer MT09TRAH 2017 Service Manual page 30

Table of Contents

Advertisement

ECA16610
NOTICE
Turn the main switch to "OFF" before dis-
connecting or connecting an electrical com-
ponent.
ECA16620
NOTICE
Handle electrical components with special
care, and do not subject them to strong
shocks.
ECA16630
NOTICE
Electrical components are very sensitive to
and can be damaged by static electricity.
Therefore, never touch the terminals and be
sure to keep the contacts clean.
BASIC SERVICE INFORMATION
TIP
When resetting the ECU by turning the main
switch to "OFF", be sure to wait approximately
5 seconds before turning the main switch back
to "ON".
Checking the electrical system
TIP
Before checking the electrical system, make
sure that the battery voltage is at least 12 V.
ECA14371
NOTICE
Never insert the tester probes into the cou-
pler terminal slots. Always insert the probes
from the opposite end "a" of the coupler, tak-
ing care not to loosen or damage the leads.
1-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tracer mt09tra 20172scm2scl2sct

Table of Contents