Yamaha Tracer MT09TRAH 2017 Service Manual page 257

7. Tighten:
• Engine mounting adjust bolt (rear) "2"
TIP
• Tighten the engine mounting adjust bolts to
specification with the pivot shaft wrench and
pivot shaft wrench adapter.
• Make sure that the flange on the engine
mounting adjust bolt contacts the engine.
Engine mounting adjust bolt
(rear)
7 N·m (0.7 kgf·m, 5.1 lb·ft)
Pivot shaft wrench
90890-01518
Frame spanner socket
YM-01518
Pivot shaft wrench adapter
90890-01476
8. Install:
• Centerstand bracket bolt (right) "9"
(temporarily tighten)
9. Install:
• Engine mounting bolt (right front upper side)
"10"
10.Tighten:
• Engine mounting nut (rear lower side) "11"
• Engine mounting nut (rear upper side) "12"
Engine mounting nut (rear lower)
45 N·m (4.5 kgf·m, 33 lb·ft)
Engine mounting nut (rear upper)
45 N·m (4.5 kgf·m, 33 lb·ft)
11.Tighten:
• Engine mounting bolt (right front upper side)
"10"
• Engine mounting bolt (left front upper side)
"6"
• Engine mounting bolt (left front lower side) "7"
• Engine mounting bolt (right front lower side)
"8"
Engine mounting bolt (front up-
per and front lower)
45 N·m (4.5 kgf·m, 33 lb·ft)
12.Tighten:
• Centerstand bracket bolt (left) "5"
• Centerstand bracket bolt (right) "9"
Centerstand bracket bolt
12 N·m (1.2 kgf·m, 8.7 lb·ft)
2
10
12
9
8 2
11
5-8
ENGINE REMOVAL
1
6
7
3
5
4