Yamaha Tracer MT09TRAH 2017 Service Manual page 107

1. Wire harness
2. Battery box
3. Brake hose (front brake master cylinder to
hydraulic unit)
4. Brake hose (hydraulic unit to front brake cali-
pers)
5. Brake hose (rear brake master cylinder to
hydraulic unit)
6. Brake hose (hydraulic unit to rear brake cali-
per)
7. Plug
8. Rear wheel sensor lead
9. Bracket
A. Make sure to insert the ABS ECU coupler all
the way in.
B. Install the brake hose (front brake master cyl-
inder to hydraulic unit) so that the protrusion
contact to the brake hose (hydraulic unit to
front brake calipers).
C. In the plug hole, install the brake hose (rear
brake master cylinder to hydraulic unit), the
brake hose (hydraulic unit to rear brake cali-
per) and rear wheel sensor lead.
D. 28–34
E. 17–21
F. 13–17
G. When installing the rear wheel sensor lead,
silicone water or soapy water may be applied.
2-66
CABLE ROUTING