Vcm Ii - Cfr Upload To Ids - Ford VCM II Operator's Manual

VCM II - CFR in
sleep mode
Waking up from
sleep
Wake-up to sleep
transition
VCM II powered
up, CFR
application not
running on the PC
or VCM II
Power to no-power
transition
* The 7-segment LED, in addition to displaying the number of recordings will flash if the
maximum number of recordings has been reached.

VCM II - CFR Upload to IDS

VCM II - CFR Upload/Playback is used to retrieve recorded vehicle data from the VCM II. Upload can be
initiated from VCM II - CFR Upload/Playback in the tool box menu, or by selecting VCM II - CFR
Upload from the Vehicle Identification Page.
1. Select VCM II - CFR Upload.
−
VCM II - CFR to IDS Connection screen appears.
2. Connect the VCM II - CFR to IDS as shown on the IDS screen.
VCM II Customer Flight Recorder Operator's Manual
OFF OFF
ON Flashing
OFF OFF
ON OFF
OFF OFF
Figure 9.0
Blank
# of recordings*
Blank
-
Display " "
(middle segment
on)
Blank
- 17 -
OFF
OFF
OFF
OFF
Beep for at least
20 sec. stop if
trigger button
pressed
Version 2.0