You should read and understand this safety information before installing, assembling and using this
DO observe the safety warnings and notices in this document.
WARNING: This indicates the presence of a hazard that can cause serious
personal injury if the hazard is not avoided.
NOTICE: This indicates the presence of a hazard that can cause damage to the VCM II –
CFR, a vehicle; other equipment connected to the VCM II - CFR, or might corrupt
software if the hazard is not avoided
Proper Installation and Use of this Equipment
This equipment has been designed, manufactured and tested to meet the requirements of
International Standards; however, like any apparatus, care must be taken in its installation and
NOTICE: This equipment must only be used by properly trained personnel.
NOTICE: Do not allow any cables of this equipment to be positioned where they can be trapped,
snagged, stretched across sharp edges, or create any potential hazard.
WARNING: If the VCM II - CFR is being used in a moving vehicle, ensure that the VCM II
- CFR and cables do not distract or interfere with the driver, or form a hazard in anyway.
WARNING: Do not allow any cables to become entangled with operator or driving controls.
This can cause interference with driving and can cause injury. Please use the provided
straps to secure cables as required.
DO use this equipment in accordance with the operating procedures.
DO NOT remove any fixed covers unless you are authorized/qualified to do so.
VCM II Customer Flight Recorder Operator's Manual
- 5 -