Download Print this page

Pendant Events And Indicators - Ford VCM II Operator's Manual

Customer flight recorder
Hide thumbs

Advertisement

The VCM II - CFR Pendant may also display other codes in certain situations. After updating the VCM II -
CFR software, the display window may show a "C". A "C" displayed on the Pendant indicates that the
configuration file downloaded to the VCM II - CFR has been lost and is normal after performing a software
update to the VCM II - CFR.
GREEN Power LED (C)
This LED will illuminate when the VCM II - CFR is connected to a power source and the VCM II is
completely booted up. This LED will be off when the VCM II is in sleep mode.
YELLOW Vehicle Communication LED (D)
This LED indicates that the VCM II - CFR is communicating with the vehicle. When the VCM II - CFR is
communicating with the vehicle, the Link LED will be ON. If communications between the vehicle and the
VCM II - CFR are lost, the YELLOW Link LED will FLASH for at least 20 seconds and then turn OFF
when the VCM II - CFR goes into Sleep Mode. The Link LED will also FLASH when uploading recording
files from the VCM II - CFR to the IDS.
An audible tone will sound once when the VCM II - CFR is powered up and when a recording is triggered.
This audible tone will also sound for at least 20 seconds after power to the VCM II - CFR is lost. To stop
the tone from sounding following power loss, press the Trigger Button on the Pendant.
Note: In the event of power loss to the VCM II - CFR, the configuration and recorded data are retained.

Pendant Events and Indicators

STATE
VCM II - CFR
powered, no
configuration File
VCM II - CFR
powered, IDS
downloading
configuration
VCM II - CFR
powered,
uploading data to
IDS
VCM II - CFR
powered, valid
configuration
Available
Initializing
communication
w/the vehicle
Normal operation
w/the vehicle
Trigger detected
Saving file in
response to trigger
VCM II Customer Flight Recorder Operator's Manual
POWER
LINK
(Green)
(Yellow)
ON
OFF
ON
OFF
OFF
ON
ON
OFF
ON
Flashing
ON
ON
ON
ON
ON
ON
DISPLAY
Display "C"
Display "0"
# of recordings*
stored on the VCM
II
# of recordings*
# of recordings*
# of recordings*
# of recordings*
Clockwise rotating
segment display,
then display # of
recordings at the
end of capture
- 16 -
BUZZER
OFF
OFF
OFF
OFF
OFF
OFF
Beep Once
OFF
Version 2.0

Hide quick links:

Advertisement

loading

  Also See for Ford VCM II