Download Print this page

Trigger Setup - Ford VCM II Operator's Manual

Customer flight recorder
Hide thumbs

Advertisement

2. Set Recordings/Duration time.
− Recording duration options are 25, 50, 100, and 200 seconds.
Since the VCM II - CFR can store up to 200 seconds, the number of recordings will vary based on the
duration selection.
3. Set Pre/Post Trigger time.
− Pre/Post trigger times are adjustable and vary with the recording duration selection.
1.
Press Tick to continue.

Trigger Setup

Trigger limits can be set on five parameters. Diagnostic Trouble Code Counts will always be selected,
when available. DTC Count parameters are pre-defined to make a recording when a DTC occurs.
3.
Select Trigger icon.
2. To set trigger limits select the Plots Limit and Format icon.
Pressing Tick after selecting limits will set the trigger for auto capture.
If you attempt to set limits on a 6
parameters that can be defined as triggers has been exceeded.
Selecting Cancel will return user to the Parameter Selection screen.
VCM II Customer Flight Recorder Operator's Manual
Figure 5.0
th
parameter, a message stating the maximum number of
- 11 -
Version 2.0

Hide quick links:

Advertisement

loading

  Also See for Ford VCM II