Download Print this page

Download To Vcm Ii - Cfr; Hook-Up To Vehicle - Ford VCM II Operator's Manual

Customer flight recorder
Hide thumbs


Deselecting a parameter and continuing allows you to set the trigger limits on the new parameter.
3. Press Tick to continue.

Download to VCM II - CFR

To download to the VCM II - CFR press the Tick on the Parameter Selection screen.
When Download has been selected, a message screen will be displayed showing the configuration
selections to be downloaded to the VCM II - CFR.
1. Press Tick if configuration settings are correct.
Select Cancel to make changes.
Once the VCM II - CFR is downloaded the user can make changes to the parameters, triggers or number of
recordings at the Parameter Select screen. The VCM II - CFR can be downloaded again with the new
configuration by selecting the Tick. The configuration will be retained by the VCM II - CFR until the next
An audible tone will sound for at least 20 seconds when the VCM II - CFR is disconnected from the power
source. Press the Trigger Button on the Pendant to stop the tone.

Hook-up to Vehicle

After the VCM II - CFR download process has been completed; a screen will appear instructing the user
how to connect VCM II - CFR to vehicle.
VCM II Customer Flight Recorder Operator's Manual
Figure 6.0
Figure 7.0
- 12 -
Version 2.0

Hide quick links:



  Also See for Ford VCM II