Playback will immediately be displayed upon completion of File Naming. For recordings previously
saved, follow these steps to view:
1. Select VCM II - CFR Upload/Playback from toolbox.
2. Select Playback sub-tab.
3. Select a saved recording to view. Each recording will display the PID data, as well as any associated
DTCs that were retrieved during that recording.
Parameters on the Playback screen are displayed in standard Datalogger display formats. The display range
can be adjusted and resized. The parameter view may be changed to display digital, x-y plot, histogram, or
bar graph as appropriate for the signal selected.
VCM II Customer Flight Recorder Operator's Manual
- 19 -