Basic Operation; Battery Charging - FUTABA FMT-03 Instruction Manual

BASIC OPERATION

Battery Charging

Before charging battery, read the "Cautions for handling battery and battery charger" in the section
"Battery Safety and Handling Instructions".
How to charge the LiFe battery FT2F2100BV2
for the transmitter
DANGER
The LiFe battery FT2F2100BV2 is only for
your FMT-03. Do not use this battery for
other equipment.
Be sure to use the attached special charger to
charge the battery.
[Method of charging battery]
1.Plug the transmitter cord of the special
charger into the charging connector in the
transmitter.
2. Plug the charger into an AC outlet.
3. Check that the charging LED lights.
The charging time when charging the FT2F2100BV2
battery with the optional special charger is approxi-
mately 3 hours.
28 <Basic Operation>
When the battery will not be used for a long time, to
prevent it from deteriorating we recommend that it be
kept in about the half capacity state instead of fully
charged. Also be careful that the battery does not en-
ter the over-discharged state due to self-discharge.
When the transmitter will not be used for a long time,
you should always remove its battery.
Periodically (about every 3 months) charge the battery.
To FMT-03 charge
connector
Transmitter Batt.
Charging display
Charging
Red solid
Charge completion
Green solid
4. Disconnect the charge plug.
5. Disconnect the AC plug.
●AC outlet
●Special charger
or
Red blink