Table of Contents
Advertisement
How to turn transmitter power ON/OFF
When turning on the power, the FMT-03
transmitter will begin emmiting RF automatically
after it confirms the surrounding RF conditions.
When turning on the power of the transmitter
1. Turn on the power switch of the transmitter.
How to stop the transmitter
1. Turn off the power switch of the transmitter.
*The transmitter shuts down at once.
Low battery alarm
When the battery voltage reaches 6.2V, an audible
alarm will sound. Land your aircraft immediately.
It can change from 6.0V to 7.6V by [SOUND] of
[SYSTEM MENU].
It recommends using it with an initial value.
Push and hold
ON OFF
Registration of the user's name
If so desired, the FMT-03 transmitter can
indicate the owner's name.
User's name setup screen
1. Turn on the power of the transmitter.
2. Select [USER NAME] in the system menu and
Push the RTN button.
*The user name set up screen appears.
Current user name
Changing the user name
1. Change the user name as described below:
[Moving cursor in input box]
Select [←] or [→], and push the RTN button.
[Deleting a character]
When [DELETE] is selected and the RTN
button is pushed, the character immediately
after the cursor is deleted.
[Adding a character]
When a candidate character is selected
from the character list and the RTN button
is pushed, that character is added at the
position immediately after the cursor.
*A name of up to 12 characters long can be entered as the
user name. (A space is also counted as 1 character.)
2. At the end of input, select [ENTER] and push
the RTN button. (To terminate input and
return to the original state, select [CANCEL]
and push the RTN button.)
Input Box
<Basic Operation>
29
Advertisement
Table of Contents
