Basic Operation; Home Screen - FUTABA FASSTest-2.4GHz T18SZ Series Instruction Manual

BASIC OPERATION

Home screen

Use the touch sensor to select the following display area to call each setting screen, and push the EDIT
button. The setting screen appears.
Model Name
• The model name that
is currently used is
displayed here.
• T h e m o d e l s e l e c t
screen can now be
opened directly from
t h e h o m e s c r e e n .
Move the cursor to
the model name on
t h e h o m e s c r e e n ,
a n d p r e s s t h e R T N
button.
User's name
• This shows the accumulated time since
the latest reset. (Each model)
(Hour):(Minute):(Second)
• Timer is displayed here.
Push the EDIT button to start/stop the
timer. (When the RTN button is touched
for 1 second, timer is reset to the initial
value.)
• Mode (UP/DN) is displayed here.
• Push the EDIT button to call the timer
setting screen.
Airplane/Glider Home Screen
Timer display screen
• When the cursor
is moved to the
clock icon "
the home screen,
the timer display
screen appears.
Condition Name
• The condition name
that is currently used
is displayed here.
Digital trim (T1 to T6)
• Trim position is displayed
here.
System timer
Timer
" of
Battery Indicator
• When the battery voltage
reaches 6.8V, the alarm will
b e e p . L a n d y o u r a i r c r a f t
immediately.
●RF Indicator
• System(FASSTest18CH etc.)
mode is displayed here.
• Use the cursor to highlight this,
then touch the RTN button
to call the frequency set-up
screen.
<Basic Operation>
(Menu)
• System
• Linkage
• Model
P u s h t h e E D I T
b u t t o n t o c a l l
e a c h M e n u
screen.
Battery voltage for
receivers
• In FASSTest
mode, it is
displayed.
System mode
31