Table of Contents
Advertisement
Stacked installation using KPTFAX12C floor stand
WARNING!
• The ground where the KPTFAX12C floor stand is placed needs to be absolutely stable and compact.
• Adjust the feet so to put the KTPTFAX12C perfectly horizontal to ground. Use a spirit level to obtain the best result.
• Always secure ground stacked setups against movement and possible tipping over.
• A maximum of 2 x AX12C speakers are allowed to be installed over a KPTFAX12C serving as ground support.
• A maximum of 1 x AX12C cabinet is allowed to be installed over a pole.
• The optimal splay angles can be simulated using the EASE Focus 3 software.
WARNING: DO NOT
STACK MORE THAN
TWO AX12C UNITS
ON FLOOR STAND
SET THE ANGLE
ONLY TO 0° OR 2°
0° or 2°
0° or 2°
AX12C STACKED USING KPTFAX12C FLOOR STAND
KPTFAX12C
IMPORTANT: NEVER INSTALL 2 OR MORE AX12C
AIMING THE SPEAKERS TO EACH OTHER
WITH CLOSED ANGLES.
In other words, NEVER use the 4° STACK position
between two speakers.
IMPORTANT:
TIGHTEN TIGHT THE THREADED KNOB
ON BOTH SIDES TO FASTEN THE BRACKETS TOGETHER
0°
*
WARNING: DO NOT
INSTALL MORE THAN
ONE AX12C UNIT
ON POLE
SET THE ANGLE
ONLY TO 0°
KPTPOLEAX12C
DHSS10M20
or
KP210S
KPTFAX12C
Advertisement
Table of Contents
