Axiom AX12C User Manual

KEY FEATURES
• High Power passive portable Line Array element
• Designed for mobile and installed applications
• Fast, easy-to-use integrated suspension system
• Aluminium frame structure
• Black or white finish
INTRODUCTION
The AX12C Line Array is a passive system equipped with twelve 3.5" neodymium transducers with waterproof cones,
designed for portable and permanently installed applications where high power and clarity are needed. The aluminum
frame box structure ensures lightweight and strength, while the shape features a back-loaded transmission line design
with clean mid-bass reproduction and natural cardioid behaviour. A Front Diffraction Waveguide (FDW) delivers wide
horizontal dispersion, making the system flexible and adaptable to many different applications.
The AX12C line array module has been designed to be combined with the SW2100A, a compact and lightweight 21"
and-Pass/Bass-Reflex subwoofer, equipped with a 4000W Class D amplifier with Power Factor Correction and PROEL's
proprietary 96kHz / 40bit floating point CORE DSP. Up to four AX12C modules can be driven by one amplifier channel
of the SW2100A subwoofer. The built-in CORE DSP, which can be also remotely controlled using PRONET AX software,
provides 4 presets for different combinations: 2, 4 or 1 columns plus 1 user preset.
The standard system, composed of four AX12C line array modules and two SW2100A subwoofers, features 8000W of
total power and a line-array dispersion pattern, making it the perfect solution for high-performance portable sound
reinforcement applications.
Thanks to the elegant mechanical design the AX12C can be easily transported, while the integrated suspension system
makes its deployment very fast and simple. Each unit comes with two aluminum brackets and four pins that allows
multiple array elements to be easily combined either together or with the matching SW2100A subwoofer, or also in
combination with the complete range of mounting hardware available, including flybar and several brackets and stands.
TECHNICAL SPECIFICATION
SYSTEM
System's Acoustic Principle
Frequency Response (±3dB)
Nominal Impedance
Minimum Impedance
Horizontal Coverage Angle
Sensitivity (4V)
Maximum (peak) SPL
TRANSDUCERS
Type
Cone
Voice Coil Type
*measured @4 m and scaled @1 m
rev04_2018-03

USER MANUAL

AX12C
High Output Column Array
Line Array Element
Short Transmission
Line Back Loading
Front Diffraction Waveguide
180 Hz - 16 KHz (Processed)
16 Ohm
12.5 Ohm
100° (-6 dB)
105 dB SPL @ 1m*
130 dB SPL @ 1m*
12 x 3.5" (88mm) Neodymium
magnet woofers, 1" (25mm) VC
Waterproof Cone
Ventilated voice coil
• 12 x 3.5" neodymium transducers with waterproof cones
• Acoustic transmission line back loading design, resulting in clean mid-bass
reproduction and natural cardioid behaviour
• Wide horizontal dispersion through Front Diffraction Waveguide (FDW)
• Line Array dispersion characteristics
INPUT CONNECTIONS
Connector Type
POWER HANDLING
Continuous AES Pink Noise Power
Program Power
ENCLOSURE & CONSTRUCTION
Width
Height
Depth
Enclosure Material
Paint
Flying system
Net Weight
Neutrik® Speakon® NL4 x 2
(1+/1- signal IN & LINK ; 2+/2- thru)
360 W
720 W
107 mm (4.2")
1166 mm (45.9") - without flying system
1212 mm (47.7") - with flying system
193 mm (7.6")
Aluminum
High resistance, water based paint, black or
white finish
Aluminum Fast Link structure with dedicated pins
10.9 kg / 24.0 lbs. (without flying system)
13 kg / 28.6 lbs. (with flying system)