Table of Contents
Advertisement
BASIC INSTALLATION INSTRUCTIONS
Stacked installation using SW2100A subwoofer as base
WARNING!
• The ground where the SW2100A is placed needs to be absolutely stable and compact.
• Adjust the feet so to put the SW2100A perfectly horizontal to ground. Use a spirit level to obtain the best results.
• Always secure ground stacked setups against movement and possible tipping over.
• A maximum of 2x AX12C or 4x AX6C or 1x AX12C + 1x AX6C speakers are allowed to be installed over a SW2100A serving as ground support.
• The optimal splay angles can be simulated using the EASE Focus 3 software.
TWO AX12C STACKED ON A SW2100A
WARNING: DO NOT STACK MORE
THAN TWO AX12C UNITS.
IMPORTANT:
WE SUGGEST TO ALWAYS
TIGHTEN THE THREADED KNOBS
ON BOTH SIDES OF THE BRACKETS
TO FASTEN TIGHTLY
THE COLUMNS TOGETHER
4
5
2
1
6
3
Advertisement
Table of Contents
