Mechanical Drawing; Optional Accessories; Spare Parts - Axiom AX12C User Manual

MECHANICAL DRAWING

OPTIONAL ACCESSORIES

COVERAX12C Cover / carry bag for single AX12C/AX12LF
AXCASE09 Flight case for two AX12C/AX12LF and accessories
AXCASE10 Flight case for four AX12C/AX12LF and accessories
ESO2500LU025 25 cm SPEAKON linking cable 4x4mm
NL4FX Neutrik Speakon® PLUG
KPTWAX12C Wall bracket for up to 2 units
KPTFAXC
Foam adapters for stage monitor or frontfill application
see http://www.axiomproaudio.com for detailed description and other available accessories.

SPARE PARTS

NL4MP Neutrik Speakon® panel socket
94SPI10100 Locking Pin for AX12C
98TDS3WZ22 3.5'' speaker - 1" VC - 22 ohm
19.3 cm
7.6"
KPTFAX12C
KPTPOLEAX12C
DHSS10M20
KP210S
KPTAX12C
PLG716
Floor stand
Pole adapter
Sub-Speaker ø35mm 1-1.7m Pole with Handle and M20 screw
Sub-Speaker ø35mm 0.7-1.2m Pole with M20 screw
Flybar for suspending up to 4 units
Straight Shackle 16 mm for Fly bar
95MET300023 AX12C front speaker net colour black
95MET300024 AX12C rear speaker net colour black
95MET300023WH AX12C front speaker net colour white
95MET300024WH
AX12C rear speaker net colour white
4 x M5
Flat Head
Allen
Screws
IMPORTANT
In case you need to replace
the AX12C bracket, utilize
the 4 screws indicated
in the figure.
In case you decide to remove
the AX12C bracket (because
it is not needed), put back
the screws in the threaded
holes as shown in the figure,
in order to avoid air leakage.