Table of Contents
Advertisement
Overview
If you are already familiar
with using DashBoard to
control Cobalt cards, please
skip to 9902-DC-4K
Function Menu List and
Descriptions (p. 3-8).
Control and Display Descriptions
9902DC4K-OM (V1.5)
This chapter contains the following information:
Control and Display Descriptions (p. 3-1)
•
Accessing the 9902-DC-4K Card via Remote Control (p. 3-5)
•
Checking 9902-DC-4K Card Information (p. 3-7)
•
9902-DC-4K Function Menu List and Descriptions (p. 3-8)
•
Troubleshooting (p. 3-29)
•
This section describes the user interface controls, indicators, and displays for
using the 9902-DC-4K card.
Access to the 9902-DC-4K functions (and the controls, indicators, and
displays related to a particular function) follows a general arrangement of
Function Menus under which related controls can be accessed (as described in
Function Menu/Parameter Menu Overview below).
Note:
When a setting is changed, settings displayed on DashBoard™ are the
settings as effected by the card itself and reported back to the remote control;
the value displayed at any time is the actual value as set on the card.
9902-DC-4K PRODUCT MANUAL
Setup Instructions
Chapter 3
Chapter 3
3-1
Advertisement
Table of Contents
Troubleshooting
