Cobalt Digital Inc 9902-DC-4K Product Manual page 44

3
Table 3-1 9902-DC-4K Function Menu List — continued
• Output Status Display
• Audio LTC Output
Note: • Although the output line drop-down on the controls described below will allow a particular range of choices, the actual
range is automatically clamped (limited) to certain ranges to prevent inadvertent conflict with active picture area
depending on video format.
• The card does not check for conflicts on a given line number. Make certain the selected line is available and carrying
no other data.
• HD ATC_LTC Insertion Control
3-20
9902-DC-4K Function Menu List and Descriptions
(continued)
Displays the current content and source being used for the timecode data
as follows:
• Output status OK (in this example, Free Run timecode is being
outputted).
• Timecode Insertion button set to Disabled; output insertion disabled.
Note: • If timecode is not available from Source Priority selections
performed, timecode on output reverts to Free Run (internal
count) mode.
• Because the 1's digit of the display Frames counter goes from 0 to
29, the fractional digit (along with the 1's digit) indicates frame
count as follows:
0.0 Frame 0
0.1 Frame 1
1.0 Frame 2
1.1 Frame 3
•
•
•
29.1 Frame 59
Audio LTC output is routed to desired embedded audio outputs using the
Output Audio Routing/Controls. Whatever timecode is displayed on the
Output Status is converted to audio LTC and available as an LTC audio
output.
For HD output, enables or disables ATC_LTC timecode insertion into the
output video, and selects the line number for ATC_LTC timecode data.
9902-DC-4K PRODUCT MANUAL 9902DC4K-OM (V1.5)