Trademark Information - Cobalt Digital Inc 9902-DC-4K Product Manual

Copyright
©Copyright 2017, Cobalt Digital Inc. All Rights Reserved.
Duplication or distribution of this manual and any information contained within is strictly prohibited without the express written
permission of Cobalt Digital Inc. This manual and any information contained within, may not be reproduced, distributed, or
transmitted in any form, or by any means, for any purpose, without the express written permission of Cobalt Digital Inc.
Reproduction or reverse engineering of software used in this device is prohibited.
Disclaimer
The information in this document has been carefully examined and is believed to be entirely reliable. However, no responsibility
is assumed for inaccuracies. Furthermore, Cobalt Digital Inc. reserves the right to make changes to any products herein to improve
readability, function, or design. Cobalt Digital Inc. does not assume any liability arising out of the application or use of any
product or circuit described herein.

Trademark Information

®
Cobalt is a registered trademark of Cobalt Digital Inc.
®
openGear is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross Video Limited.
Congratulations on choosing the Cobalt
with Optional Frame Sync. The 9902-DC-4K is part of a full line of modular processing and conversion gear
for broadcast TV environments. The Cobalt Digital Inc. line includes video decoders and encoders, audio
embedders and de-embedders, distribution amplifiers, format converters, remote control systems and much
more. Should you have questions pertaining to the installation or operation of your 9902-DC-4K, please contact
us at the contact information on the front cover.
Manual No.:
Document Version:
Release Date:
Applicable for
Firmware Version
(or greater):
Description of
product/manual
changes:
®
9902-DC-4K Quad-Input 3G/HD UHD Broadcast Downconverter
9902DC4K-OM
V1.4
October 25, 2017
2.018 or greater
- Update manual to correctly describe product as
"with Optional Frame Sync". Frame sync was
originally described as being available with the
product. Frame sync is available as a software
option using option code +FS.
9902DC4K-OM (V1.5)