Setting Up 9902-Dc-4K Network Remote Control - Cobalt Digital Inc 9902-DC-4K Product Manual

Installation

Setting Up 9902-DC-4K Network Remote Control

9902DC4K-OM (V1.5)
Perform remote control setup in accordance with Cobalt
"Remote Control User Guide" (PN 9000RCS-RM).
Note: • If network remote control is to be used for the frame and the frame has not
yet been set up for remote control, Cobalt
Control User Guide (PN 9000RCS-RM) provides thorough information and
step-by-step instructions for setting up network remote control of Cobalt
cards using DashBoard™. (Cobalt
Remote Control Panels are not recommended for use with this product.)
Download a copy of this guide by clicking on the
Support > Reference Documents link at www.cobaltdigital.com and then
select DashBoard Remote Control Setup Guide as a download, or contact
®
Cobalt as listed in Contact Cobalt Digital Inc. (p. 1-14).
• If installing a card in a frame already equipped for, and connected to
DashBoard™, no network setup is required for the card. The card will be dis-
covered by DashBoard™ and be ready for use.
9902-DC-4K PRODUCT MANUAL
Setting Up 9902-DC-4K Network Remote Control
®
reference guide Remote
®
OGCP-9000 and/or OGCP-9000/CC
®
reference guide
®
2-5