Chapter 2 Installation And Setup; Overview; Installing The 9032 Into A Frame Slot - Cobalt Digital Inc 9032 Product Manual

Overview

Installing the 9032 Into a Frame Slot

9032-OM (V4.1)
Installation and Setup
Chapter 2
This chapter contains the following information:
•
Installing the 9032 Into a Frame Slot (p. 2-1)
•
Installing the 9032 Into a Frame Slot (p. 2-1)
•
Installing a Rear I/O Module (p. 2-3)
•
Setting Up 9032 Network Remote Control (p. 2-6)
CAUTION
Heat and power distribution requirements within a frame may dictate specific
slot placement of cards. Cards with many heat-producing components should
be arranged to avoid areas of excess heat build-up, particularly in frames
using only convection cooling. The 9032 has a moderate power dissipation
(10 W). As such, avoiding placing the card adjacent to other cards with similar
dissipation values if possible.
CAUTION
This device contains semiconductor devices which are
susceptible to serious damage from Electrostatic
Discharge (ESD). ESD damage may not be immediately
apparent and can affect the long-term reliability of the
device.
Avoid handling circuit boards in high static environments
such as carpeted areas, and when wearing synthetic fiber
clothing. Always use proper ESD handling precautions
and equipment when working on circuit boards and
related equipment.
9032 PRODUCT MANUAL
Chapter 2
2-1