Cobalt Digital Inc 9902-DC-4K Product Manual page 33

Setup Instructions
Table 3-1 9902-DC-4K Function Menu List
• 4K Input Type Select
• Quadrant Input Source Select
• Output Format Select
9902DC4K-OM (V1.5)
9902-DC-4K Function Menu List and Descriptions
Provides controls to select input routing of card SDI
inputs to the four quadrants comprising the combined
image raster.
Input Routing Controls
Sets the four-quadrant inputs to accept either 4K Four Quadrant or 4K
Two-Sample Interleaved.
Routes the card SDI inputs (VID IN A thru VID IN D as In A thru In D,
respectively) to the four card quadrant inputs.
(In this example, VID IN A thru VID IN D are respectively routed as
Quadrant 1 thru Quadrant 4 input sources.)
Default correlation of In A thru In D and quadrant identification is as
shown to the left and below:
Quadrant 1
Quadrant 3
Provides controls to set combined output format/
conditioning and card global ref lock mode.
Output Format Controls
Provides output conversions to formats as shown.
Note: Although drop-down and card will allow output video raster/rate
choices unrelated to the input rates (for example, PAL 50Hz rate for
NTSC 59.94Hz input rates), cross-rate conversion choices should
not be used for critical applications (frames will be dropped when
performing such conversions).
9902-DC-4K PRODUCT MANUAL
Quadrant 2
Quadrant 4
3-9