Admin - Cobalt Digital Inc 9902-DC-4K Product Manual

3
Table 3-1 9902-DC-4K Function Menu List — continued
Download (save) card presets to a
network computer by clicking
Download Presets – Save at the
bottom of the Presets page.
Browse to a desired
save location (in
this example, My
Documents\Cobalt
Presets).
The file can then be
renamed if desired
(RCVR21 Presets
in this example)
before committing
the save.
• Log Status and Download Controls

Admin

3-26
9902-DC-4K Function Menu List and Descriptions
(continued)
Upload (open) card presets from a network
computer by clicking Upload
at the bottom of
DashBoard.
Browse to the location
where the file was saved
on the computer or
drive (in this
example, My
Documents\Cobalt
Presets).
Select the desired
file and click Open
to load the file to the
card.
Note: • Preset transfer between card download and file
upload is on a group basis (i.e., individual presets
cannot be downloaded or uploaded separately).
• After uploading a presets file, engagement of a
desired preset is only assured by selecting and
loading a desired preset as described on the
previous page.
Provides a global card operating status and allows a log
download for factory engineering support. Also provides
controls for selecting and loading card firmware
upgrade files.
Networking controls provide dedicated card networking
setup in conjunction with rear module Ethernet port.
• Log Status indicates overall card internal operating status.
• Download Log File allows a card operational log file to be saved to
a host computer. This log file can be useful in case of a card error or
in the case of an operational error or condition. The file can be
submitted to Cobalt engineering for further analysis.
• Thermal Shutdown enable/disable allows the built-in thermal
failover to be defeated. (Thermal shutdown is enabled by default).
CAUTION
The 9902-DC-4K FPGA is designed for a normal-range operating
temperature around 85° C core temperature. Operation in severe
conditions exceeding this limit for non-sustained usage are within
device operating safe parameters, and can be allowed by setting this
control to Disable. However, the disable (override) setting should be
avoided under normal conditions to ensure maximum card
protection.
9902-DC-4K PRODUCT MANUAL 9902DC4K-OM (V1.5)