Scan Operation; Weather Channel Scan (U.s.a. Version Only); Tag" Channel Setting - Icom IC-A24 Instruction Manual

Weather channel scan
■
(U.S.A. version only)
q Push , then push [ENT•
nel.
w Set the squelch to the point where noise is just muted.
e Push , then push [ANL•
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, rotate [DIAL].
r To stop the scan, push [CLR•
] to select a weather chan-
WX
] to start the scan.
SCAN
].
DEL

"TAG" channel setting

■
Memory and weather channels* can be specified to be
skipped for the memory and weather channel* scans re-
spectively. The "TAG" channel function is only available dur-
ing the scan operation.
Push
Appears the "TAG" indicator.
Memor y channel 15 is
scanned during memory
scan.
q Push [MR• ] to select the memory mode; or, push
MW
then push [ENT• ] to select a weather channel.*
WX
w Select the desired memory channel to be a "TAG" chan-
nel.
• Push , then push [0•
BANK
BANK number, if desired. Push [CLR•
lection mode.
e Push , then push [9•
TAG
• "TAG" appears.
• Non-"TAG" channels are skipped during scan.
r To cancel the "TAG" setting, repeat the above steps.
*Weather channel: U.S.A. version only.

SCAN OPERATION

then
Memor y channel 15 is
skipped during scan.
], and rotate [DIAL] to select the
] to exit the BANK se-
DEL
] to set a "TAG."
5
1
2
3
4
5
6
7
8
9
10
11
12
13
,
14
17