I Weather Channel Scan (U.s.a. Version Only); I "Tag" Channels; Scan Operation - Icom IC-A24 Instruction Manual

5

SCAN OPERATION

I Weather channel scan
(U.S.A. version only)
q Push
, then push [ENT•
nel.
w Set squelch to the point where noise is just muted.
e Push
, then push [ANL•
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, rotate [DIAL].
r To stop the scan, push [CLR•
17
] to select a weather chan-
WX
] to start the scan.
SCAN
].
DEL
I "TAG" channel setting
Memory and weather channels* can be specified to be
skipped for the memory and weather channel* scans respec-
tively. The "TAG" channel function is only available during
scan operation.
Push
Appears the "TAG" indicator.
Memory channel 15 is
scanned during memory
scan.
q Push [MR•
] to select memory mode; or, push
MW
push [ENT• ] to select a weather channel.*
WX
w Select the desired memory channel to be a "TAG" chan-
nel.
• Push , then push [0•
BANK
BANK number if desired. Push [CLR•
lection mode.
e Push
, then push [9•
TAG
• "TAG" appears.
• Non-"TAG" channels are skipped during scan.
r To cancel the "TAG" setting, repeat above steps.
*Weather channel: U.S.A. version only.
then
Memory channel 15 is
skipped during scan.
, then
], and rotate [DIAL] to select the
] to exit the BANK se-
DEL
] to set a "TAG."