Advanced Setup Screens - Graco 259079 Operation Manuals

Reactor e-30i series; reactor e-xp2i series; electric, heated, integrated plural component proportioning system with integrated generator
Table of Contents

Advertisement

Advanced Display Module (ADM) Operation

Advanced Setup Screens

Advanced setup screens enable users to set units, adjust values, set formats, and view software information
for each component. Press
Advanced setup screen, press
to exit edit mode.
Note
Users must be out of edit mode to scroll
through the Advanced setup screens.
Advanced Screen 1 — General
Use this screen to set the language, date format,
current date, time, setup screens password (0000 –
for none) or (0001 to 9999), screen saver delay, and
enable or disable silent mode.
Advanced Screen 2 — Units
Use this screen to set the temperature units, pressure
units, volume units, and cycle units (pump cycles or
volume).
46
to scroll through the Advanced setup screens, Once in the desired
to access the fields and make changes. When changes are complete press
Advanced Screen 3 — USB
Use this screen to disable USB downloads/uploads,
disable USB log errors, enter the maximum number
of days to download data, and how frequently USB
logs are recorded. See USB Data, page 86.
Advanced Screen 4— Software
This screen displays the software part number and
software version for the Advanced Display Module,
Motor Control Module, High Power Temperature
Control Module, Low Power Temperature Control
Modules, and USB Configuration.
3A1705E

Advertisement

Table of Contents
loading

This manual is also suitable for:

259080259091259090259081259089

Table of Contents