F_2 Unit Selection Function - SMC Networks PF2A712H Operation Manual

■[F_2] Unit selection function
Display unit can only be selected for products with unit selection unction.
:
This function is not displayed for the model without unit selection function.
<Operation>
Press the , and
Unit selection function
Press the button for select.
Display Instantaneous flow
[ U_1]
1
[ U_2]
1: Refer to the table below for the flow rate when [ U_2] is selected.
2: Refer to page
18 for the change of the unit (the display digits) for
accumulated flow.
Setting of unit selection function is completed.
Return to measurement mode.
Flow specification when [ U_2] is selected by the unit selection function
Model
Rated flow range
Setting/display flow

range
Min. setting/display unit
Setting/display flow
range
Min. setting/display unit
Conversion of accumulated pulse
: Flow rate in the specification is the value at standard condition.
If the display unit standard is changed from standard to normal, use the conversion formula.
Flow rate at standard condition x 0.927 = Flow rate at normal condition
buttons in function selection mode to display [F_2].
Accumulated flow
3
L/min L, m
3 3
CFM ft , ft x 10
Press the button.
PF2A703H
5.5 to 106.0 CFM
4.5 to 107.0 CFM
Press the button.
2
3 3
, m x 10
2
3 3 6
, ft x 10
Setting of unit selection function is completed.
Move on to [F_3] Selection of output mode.
PF2A706H
10.5 to 212.0 CFM
9.0 to 213.5 CFM
0.5 CFM
999999999.9 ft
3
0.1 ft
3
10 ft /pulse
-23-
Press the button.
PF2A712H
21.0 to 423.5 CFM
19.5 to 425.5 CFM
3
No.PF※※-OMG0010-G